D108264 Multifunction Digital Light Intensity Sensor Module - Blue Overview:- Model: D108064
- Quantity: 1
- Color: Blue
- Material: FR4 + PCB
- Chip: BH1750FVI
- Power supply: 3V~5V
- Light range: 0~65535 lx
- Sensor built-in: 16 bitAD converter
- Direct digital output
- Applies to: Digital light intensity module, light sensor module, illumination module
- Packing list:
- 1 x Digital light intensity module
Dimensions: 1.50 in x 0.63 in x 0.31 in (3.8 cm x 1.6 cm x 0.8 cm)
Weight: 0.18 oz (5 g)
It has regulator on PCB (works with 5V voltage).
I2C bus is used for communication, so it's easy to connect to microcontroller.
Address can be set using ADDR line.
Wide sensitivity range: from 0 lux to ~54600 lux.
Simple I...
I am using this one for my light automat in my car combined with arduino.
I found nice library:
https://github.com/claws/BH1750
which works like a charm.
Easy to use, light reading in lx is after the math which is in of of...
Convenient form factor, easy to set up and use (if you're familiar with electronics and I2C protocol). Good factory calibration (10-15% off from calibrated luxmeter), can be adjusted during run time. It even memorizes so a...
It has regulator on PCB (works with 5V voltage).
I2C bus is used for communication, so it's easy to connect to microcontroller.
Address 0...
I am using this one for my light automat in my car combined with arduino.
I found nice library:
https://github.com/claws/BH1750
which a /...
Convenient form factor, easy to set up and use (if you're familiar with electronics and I2C protocol). Good factory calibration (10-15% a...
