DC 4~40V to DC 1.5~35V Voltage Step Down Transformer (LM2596S) Overview:- Model: LM2596
- Color: Red
- Material: PCB
- Input: DC 4~40V
- Output: DC 1.5~35V
- Current: 3A (max.)
- Built-in SANYO fixed capacitor
- 36u thick circuit boards
- High-power high-Q inductors
Dimensions: 1.69 in x 0.79 in x 0.55 in (4.3 cm x 2.0 cm x 1.4 cm)
Weight: 0.56 oz (16 g)
Pretty cheap. Wide voltage range. Useful for constructions when you need to get several voltage levels from battery of other lager level. No reverse input voltage protection. I 've destroyed one module in a few seconds by...
Very small and easy to fit.
Nicely built.
Clearly labeled connections.
Works as advertized. Could have been shipped with some power connectors installed which would make life easier.
Voltage adjuster needs many turns to up...
It does what it;s supposed to be doing and it is cheap. I used it to feed a 24 channel servo driver with 5V. The original source was 18V 6A, and the average current consumption on the driver peaked at ~1.5A during the of a...
Good quality converter, high quality Pcb material with red coating and good solder quality. smal size PCB low energy loss. The default outputvoltage = 12V.
You can adjust the voltage by turning the small screw on the PCB....
This module was exactly what I was looking for.
In my rc planes I needed to power a little camera, so I used this device to step down the voltage. It is simple to use, easy to adjust voltage. Since I do not use it to draw...
Cheap, small, enough powerful DC-DC convertor that is suitable for DIY projects. You can achieve up to 2A continuous current with Without...
It does what it;s supposed to be doing and it is cheap. I used it to feed a 24 channel servo driver with 5V. The original source was 18V...
Very small unit wich makes every voltage below the input possible, with high efficiency and a good current.
Produces almost no heat and A...
